YSD PPTK Hydraulic Press Brake 70/30
Standard feature of YSD PPT series press brake:
1. The machine is made under technology license from LVD, Belgium.
2. Full steel welded structure, stress released through vibration by adopting Germany technology, with rigidity and accuracy well kept. Warranty for the main frame of the machine is full working life.
3. Main frame and component is designed and Finite Element Analyzed under ANSYS/UG software.
4. Simple, effective and accurate synchronized balancing system, synchronization of ram movement achieved through torsion bar.
5. Double-acting YSD quality cylinders ensure high reliability and safety.
6. Reliable hydraulic system, integrated Mono-block hydraulic system and worldwide famous valves and seals are adopted, and the pipeline and connections are reduced to the minimum level to ensure minimum maintenance.
7. High-pressure internal gear pump from NACHI, Japan, with reliability and low noise.
8. Relief valve is adopted to protect the oil pump and hydraulic system when over-loading.
9. Pressure gauge could be adjusted manually according to actual required bending force. Thus the hydraulic valves and oil seals could run reliably and safely for long life.
10. Simple and compact electrical design is adopted for the convenience of maintenance. All electrical components is selected according to DIN and ISO standard.
11. Control on three points: Top Dead point, Bottom Dead point and Mute point.
1. The machine is made under technology license from LVD, Belgium.
2. Full steel welded structure, stress released through vibration by adopting Germany technology, with rigidity and accuracy well kept. Warranty for the main frame of the machine is full working life.
3. Main frame and component is designed and Finite Element Analyzed under ANSYS/UG software.
4. Simple, effective and accurate synchronized balancing system, synchronization of ram movement achieved through torsion bar.
5. Double-acting YSD quality cylinders ensure high reliability and safety.
6. Reliable hydraulic system, integrated Mono-block hydraulic system and worldwide famous valves and seals are adopted, and the pipeline and connections are reduced to the minimum level to ensure minimum maintenance.
7. High-pressure internal gear pump from NACHI, Japan, with reliability and low noise.
8. Relief valve is adopted to protect the oil pump and hydraulic system when over-loading.
9. Pressure gauge could be adjusted manually according to actual required bending force. Thus the hydraulic valves and oil seals could run reliably and safely for long life.
10. Simple and compact electrical design is adopted for the convenience of maintenance. All electrical components is selected according to DIN and ISO standard.
11. Control on three points: Top Dead point, Bottom Dead point and Mute point.
Specification 70/30
Press force KN 700
Working length mm 3000
Distance between uprights 2550
Stroke of ram mm 100
Ram travel adjustment mm 80
Daylight mm 300
Throat depth mm 300
of table mm 140
Approaching speed mm/s 100
Working speed mm/s 7
Returning speed mm/s 88
Motor power kw 4
Approx.weight kg 4850
Backgauge travel mm 600
Volume of oil tank L 110
Length of machine mm 3145
Width of machine mm 1275
Height of machine mm 2110
Press force KN 700
Working length mm 3000
Distance between uprights 2550
Stroke of ram mm 100
Ram travel adjustment mm 80
Daylight mm 300
Throat depth mm 300
of table mm 140
Approaching speed mm/s 100
Working speed mm/s 7
Returning speed mm/s 88
Motor power kw 4
Approx.weight kg 4850
Backgauge travel mm 600
Volume of oil tank L 110
Length of machine mm 3145
Width of machine mm 1275
Height of machine mm 2110